Need help?Do you have a question about the Hanna Instruments HI 2314 and is the answer not in the manual?
General| Model | HI 2314 |
|---|---|
| Category | Laboratory Equipment |
| pH Range | -2.00 to 16.00 pH |
| pH Resolution | 0.01 pH |
| pH Accuracy | ±0.01 pH |
| Temperature Resolution | 0.1 °C |
| Logging | No |
| Power Supply | 12 VDC adapter (included) |
| mV Range | ±2000 mV |
| mV Accuracy | ±1 mV |
| Temperature Accuracy | ±0.4 °C |
| Temperature Compensation | Automatic or Manual |
| Input Impedance | 10^12 Ω |
| Environment | 0 to 50 °C, RH max 95% non-condensing |
| Electrode | HI 1131B glass body pH electrode (included) |
| mV Resolution | 0.1 mV |
Overview of controls and indicators on the front panel of the HI 2314 conductivity meter.
Identification of connection ports and switches located on the rear panel of the HI 2314 conductivity meter.
Detailed conductivity measurement ranges for the HI 2314 model, from µS/cm to mS/cm.
Specifies the resolution for each measurement range of the HI 2314 conductivity meter.
States the accuracy of the HI 2314 conductivity meter at 25°C, excluding probe error.
Describes the manual, single-point calibration procedure for the HI 2314 conductivity meter.
Details the manual temperature compensation method for the HI 2314, including the adjustable range and coefficient.
Information about the HI 76300 platinum 4-ring conductivity probe included with the HI 2314.
Covers power supply, operating environment, physical dimensions, and weight for the HI 2314 meter.
Overview of controls and indicators on the front panel of the HI 2315/HI 23151 conductivity meters.
Identification of connection ports and switches located on the rear panel of the HI 2315/HI 23151 meters.
Detailed conductivity measurement ranges for the HI 2315/HI 23151 models.
Specifies the resolution for each measurement range of the HI 2315/HI 23151 meters.
States the accuracy of the HI 2315/HI 23151 meters at 25°C, excluding probe error.
Describes the manual, single-point calibration procedure for the HI 2315/HI 23151 meters.
Details automatic temperature compensation for HI 2315/HI 23151 with adjustable coefficient.
Information about the HI 76303 probe included with the HI 2315/HI 23151.
Details the analog output feature available only on the HI 23151 model.
Covers power supply, environment, dimensions, and weight for HI 2315/HI 23151 meters.
Steps for connecting the power adapter and the conductivity probe to the instrument.
Recommended preparation steps before calibrating the conductivity meter.
Table showing conductivity values for various calibration solutions at different temperatures.
List of available conductivity probes and calibration solutions for the meters.
Catalog of cleaning solutions recommended for probe maintenance.
To Next Page
