Need help?Do you have a question about the Hanna Instruments pH 500 Series and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Model Series | pH 500 Series |
| pH Range | 0.00 to 14.00 pH |
| pH Resolution | 0.01 pH |
| mV Resolution | 1 mV |
| Power Supply | 12 VDC adapter (included) |
| Temperature Resolution | 0.1°C |
| Temperature Accuracy | ±0.5°C |
| Display | LCD |
| Output | 4-20 mA |
| Relay Outputs | 2 |
| Relay | 5A @ 250V AC |
| Probe Input | BNC |
| Temperature Compensation | Automatic or Manual from 0.0 to 60.0°C (32.0 to 140.0°F) |
Procedure to enter the password for accessing and modifying setup parameters.
Details the different operational modes for the instrument's relays.
Detailed procedure for performing a two-point pH calibration.
Regular maintenance tasks to ensure electrode longevity and performance.
To Next Page
