To Next Page

To Previous Page

User’s Manual

OSD

LANGUAGE

Select「LANGUAGE」option to change the language of the OSD.

Enter the option and select a language. [Reference only, the OSD

Language depends on the selected model]

H-POSITION

Select「 H-POSITION」option to adjust the horizontal position of

the OSD. Enter the option and adjust the level.

V-POSITION

Select「V-POSITION」option to adjust the vertical position of the

OSD. Enter the option and adjust the level.

TRANSPARENCY

Select「TRANSPARENCY」option to adjust the transparency of

the OSD. Enter the option and adjust the level.

OSD TIME OUT

Select「OSD TIME OUT」option to set the OSD time out from 5

to 60 seconds. Enter the option and adjust the level.

OSD ROTATION

Select「OSD ROTATION」option to rotate the window of the

OSD. Available settings are Normal/ 90/ 180/ 270.

OTHER

DP VERSION

Select the「DP VERSION」option to switch the function DP1 or

DP2

ADAPTIVE-SYNC

Select the「ADAPTIVE-SYNC」option to change the

ADAPTIVE-SYNC function.

HDR

Select the「HDR」option to change the HDR function.

CROSS

Select the「CROSS」option to change the CROSS function.

DDC/CI

Select the 「DDC/CI」option to switch the function On or Off.

[Dual input mode optional]

RESET

Select the「RESET」option to reset to the monitor’s default

setting. This will erase the current settings.

HANNspree HG342PCB User Manual

Questions and Answers: