Hanover DG3 - 3.5.9.2 How to set the time:; 3.5.9.3 How to set the timezone:; 3.5.9.4 How to confirm new clock settings:

DG3 Controller – Installation and Operation
Manual
540846-3 page 38 of 64 25/09/2015
Use the up arrow key to increase the dd or the down
arrow key to decrease the dd.
Then press F/E key to confirm your date.
3
The mm will flash.
Use the up arrow key to increase the mm or the down
arrow key to decrease the mm.
Then press F/E key to confirm your month.
4
The yy will flash.
Use the up arrow key to increase the yy or the down
arrow key to decrease the yy.
Then press F/E key to confirm your year.
3.5.9.2 How to set the time:
Step
Description
Figure
1
The screen for the time is displayed as shown: hh:mm (in
24-hour format) for hours:minutes.
2
The hh will flash.
Use the up arrow key to increase the hh or the down
arrow key to decrease the hh.
Then press F/E key to confirm your hours.
3
The mm will flash.
Use the up arrow key to increase the mm or the down
arrow key to decrease the mm.
Then press F/E key to confirm your minutes.
3.5.9.3 How to set the timezone:
Step
Description
Figure
1
The screen for the timezone is displayed as shown.
2
The '+ 0' will flash.
Use the up arrow key to increment the value by 15
minutes or the down arrow key to decrease the value by
15 minutes.
Then press F/E key to confirm your timezone.
3.5.9.4 How to confirm new clock settings:
Step
Description
Figure
1
The confirmation screen is displayed as shown.
2
Use the left arrow key to confirm the new clock settings
or the up arrow key if you do not want to confirm the
changes made.
Confirm?
28/04/2014 11:14 (+0)
Yes ------- No
Date:
2 8 / 0 4 / 2 0 1 4
Time:
1 1 : 14
Timezone: (+/- UTC)
[ + 0 ]