DG3 Controller – Installation and Operation
Manual
540846-3 page 43 of 64 25/09/2015
Transferring the database from the USB
stick to the DG3.
* When a USB stick is inserted into the DG3, it will always look for (and download) a firmware file first before attempting
to start a data download. There is thus no problem if the stick contains an up-to-date firmware.han file as well as an
eric.BIN file. However, it does mean that if an updated eric.BIN file is later saved to the stick and downloaded to the
DG3, the firmware.han file on the stick will also be downloaded first. There is thus a danger that an older version of the
firmware will be downloaded if more recent firmware updates have been carried out using another USB stick.
Accordingly, it may be sensible to keep one stick for data and another for firmware.
To Next Page
Loading...