Hansa F3 CHAFF CUTTER - What can my Hansa chaff cutter process?; Intended uses of the chaff cutter; Receiving your Hansa chaff cutter; Chaff cutter components

Hansa F3 Chaff Cutter O&M Manual - OM-016 Revision B 14/05/2019
© Hansa Products 2019
1
What can my Hansa chaff cutter process?
Intended uses of the chaff cutter
The Hansa F3 chaff cutter is built to process animal feed and light organic material. Do NOT use the machine for any other purpose.
Suitable feed materials include:
Hay
Lucerne
Silage
Chaff
Do NOT process:
Bones
Soil, sand, grit, stones, metal
Sticks and other lignified (woody) plant material
Paper, cardboard
Processing this kind of material can cause damage to the cutting mechanism of the machine.
If you have any questions, contact Hansa or your local authorised dealer.
Receiving your Hansa chaff cutter
You may receive your chaff cutter assembled from your dealer or it may arrive packaged in a crate. Assembly takes approximately
10 minutes.
Chaff cutter components