Why my Hanseatic HGTI4582C10T7736ES Dishwasher cannot be switched on?
If your Hanseatic dishwasher won't switch on, make sure the mains plug is properly inserted into the socket. Also, check the fuse and test the socket with another device to ensure it's supplying voltage.
Why are the dishes not completely clean in my Hanseatic HGTI4582C10T7736ES?
If your Hanseatic dishwasher isn't cleaning dishes completely, it might be due to several reasons. Food scraps may be encrusted on the dishes, so try soaking them before washing. Ensure dishes are stacked so water jets can reach all parts. You might have selected the wrong program or used the wrong amount of detergent; check the program table and adjust detergent dosage. Also, ensure the water pressure is sufficient by turning the tap on fully. Make sure the spraying arm isn't blocked by dishes and that the nozzles are clean.
What to do if the selected dishwashing programme will not start on my Hanseatic HGTI4582C10T7736ES Dishwasher?
If your Hanseatic dishwasher program won't start or stops, ensure the dishwasher door is fully closed and the water tap is completely turned on. If these steps don't resolve the issue, the inlet hose may be defective.
Why is the water not running properly in my Hanseatic HGTI4582C10T7736ES?
If the water isn't running or is running very slowly in your Hanseatic dishwasher, check the inlet hose for kinks and straighten it if necessary. Also, ensure the water tap is fully turned on.
Why is the LED illuminated on my Hanseatic HGTI4582C10T7736ES Dishwasher after adding salt?
If the LED is illuminated even after adding dishwasher salt to your Hanseatic dishwasher, the salt might be clumpy. Try stirring the dishwasher salt using a spoon or a similar utensil.
What to do if the water is not running off in my Hanseatic HGTI4582C10T7736ES?
If your Hanseatic dishwasher isn't draining water properly, the filters might be blocked and need cleaning. Also, check the outlet hose to ensure it's not kinked, extended, or positioned too high or low.
Why is my Hanseatic HGTI4582C10T7736ES leaking?
If your Hanseatic dishwasher is leaking, the door seal, outlet hose, or inlet hose might be defective.
What does E3 error mean on Hanseatic HGTI4582C10T7736ES?
If your Hanseatic dishwasher displays error code E3, the heating element is defective.
What does E4 error mean on Hanseatic HGTI4582C10T7736ES Dishwasher?
If your Hanseatic dishwasher displays error code E4, there is a water overflow. Switch off the tap and repair the leak.
How to fix a Hanseatic HGTI4582C10T7736ES that won't turn on?
If your Hanseatic Dishwasher isn't turning on, there are a couple of things to check: * First, ensure the mains plug is fully inserted into the socket. If it's plugged in, verify that the socket is supplying voltage by checking the fuse or testing the socket with another device.
General| Type | Freestanding |
|---|---|
| Capacity | 14 place settings |
| Noise Level | 44 dB |
| Child Lock | Yes |
| Drying Class | A |
| Half Load Option | Yes |
| Water Consumption per Cycle | 9.5 L |
| Delay Start | Yes |
| Dimensions (H x W x D) | 84.5 cm x 59.8 cm x 60 cm |
| Size | Full-size |
Lists all items included in the dishwasher delivery package.
Instructions for verifying the completeness and condition of delivered items.
Defines the appliance's purpose and limitations for safe and proper operation.
Defines symbols used in the manual to convey important safety information.
Covers electrical hazards, fire risks, tripping hazards, and corrosion risks.
Risks associated with under-counter and built-in installations.
Addresses dangers for children and individuals with limited capabilities.
Identifies and explains the buttons, indicators, and display on the control panel.
Illustrates and labels key internal parts like racks, spray arms, and filter.
Instructions on how to properly add detergent to the dispenser for cleaning cycles.
Explains the use and benefits of combined detergent, rinse aid, and salt tablets.
Guides on how to fill and use the rinse aid dispenser for optimal drying.
Details how to adjust the amount of rinse aid dispensed for better cleaning results.
Instructions for filling the salt compartment to prevent limescale and ensure water softening.
General loading advice, risks, and a list of items not to wash.
Guidance on arranging cutlery in the basket for efficient cleaning and drying.
Instructions for upper/lower racks and adjusting upper rack height.
Essential preparatory steps and safety checks before initial use.
How to choose wash cycles, use options, and environmental tips.
Details on starting, quick wash, door opening, spray arms, and delayed start.
Steps for starting, ending, and safely unloading the dishwasher.
How to modify cycles, add items during operation, and use child lock.
How to clean the exterior surfaces and the door seal to maintain hygiene and function.
Instructions for removing, cleaning, and reinstalling the appliance's filters.
How to clean the spray arms to ensure proper water distribution.
Guidance on using special cleaning products for intensive appliance cleaning.
Steps to take to protect the dishwasher from frost in cold environments.
Choosing a location and connecting inlet/outlet hoses.
Mains plug connection, safety, and general installation requirements.
Adjusting feet for stability and mounting brackets.
Explains how to find out the local water hardness level.
Steps to set the appliance's water hardness level via the control panel.
Recommended initial test cycle to ensure proper functioning and remove residues.
Addresses issues like not switching on, program start/stop, water flow, and leaks.
Solutions for residues, streaks, and incomplete cleaning.
Explains error codes displayed by the appliance and how to resolve them.
How to seek assistance for incomplete deliveries, damage, or general queries.
Information on spare parts availability and contacting service departments.
Guidelines for environmentally friendly disposal of the old appliance.
Instructions for recycling or disposing of the product's packaging materials.
To Next Page