To Next Page
M
Marie ClementsSep 8, 2025
What to do if Hanseatic Dishwasher has water overflow?
- JJames SullivanSep 8, 2025
If your Hanseatic Dishwasher has a water overflow, switch off the tap and repair the leak.
What to do if Hanseatic Dishwasher has water overflow?
If your Hanseatic Dishwasher has a water overflow, switch off the tap and repair the leak.
What to do if water is not running or running very slowly in my Hanseatic HGTI6082E127735BS Dishwasher?
If the water is not running or is running very slowly in your Hanseatic Dishwasher, check if the inlet hose is kinked and straighten it. Also, ensure that the water tap is fully turned on.
What to do if the water is not running off or only very slowly in my Hanseatic HGTI6082E127735BS?
If the water is not running off or is running off very slowly in your Hanseatic Dishwasher, the filters may be blocked or the outlet hose may be kinked, extended, or improperly positioned.
How to fix a Hanseatic Dishwasher that won't turn on?
If your Hanseatic Dishwasher won't switch on, the issue might be that the mains plug isn't fully inserted into the socket. Ensure the mains plug is properly inserted. Also, check if the socket is supplying voltage by testing the fuse or connecting another device to the socket.
What to do if the Hanseatic Dishwasher program won't start?
If the selected dishwashing programme on your Hanseatic Dishwasher won't start or stops, make sure that the appliance door is properly closed and that the water tap is fully turned on. If these steps don't resolve the issue, the inlet hose may be defective, but you should contact our service team in this case.
Why is water running slowly into my Hanseatic HGTI6082E127735BS Dishwasher?
If water is running slowly or not at all into your Hanseatic Dishwasher, check if there is a kink in the inlet hose. If so, lay out the inlet hose so that it is not kinked. Also, ensure that the water tap is fully turned on.
What to do if my Hanseatic Dishwasher is not watertight?
If your Hanseatic Dishwasher is leaking water, the door seal or the inlet/outlet hose might be defective.
Why is my Hanseatic HGTI6082E127735BS not cleaning dishes completely?
Your Hanseatic Dishwasher might not be cleaning dishes completely due to several reasons: food scraps encrusted on the dishes (soak them beforehand), dishes not stacked optimally (ensure water jets reach all parts), incorrect dishwashing program selected (choose the correct one), incorrect dosage of detergent used (use the correct amount), low water pressure (turn the water tap on completely), spraying arm obstructed (ensure free rotation), or blocked/calcified spray nozzles (clean them).
Why my Hanseatic Dishwasher cannot be operated?
If your Hanseatic Dishwasher cannot be operated, the buttons may be locked. In this case you should unlock the buttons.
How to fix a leaking Hanseatic HGTI6082E127735BS Dishwasher?
If your Hanseatic Dishwasher is not watertight, the door seal may be defective, or the outlet or inlet hose may be defective. In this case you should have the defective hose replaced.
General| Type | Freestanding |
|---|---|
| Energy Efficiency Class | E |
| Noise Emission Class | C |
| Number of Programs | 6 |
| Drying Efficiency Class | A |
| Half Load Option | Yes |
| Child Lock | Yes |
| Programs | Eco, Glass, Intensive, Quick |
| Delay Start | Yes |
| Size | Full-size |
