CAUTION
Fire hazard!
Improper handling of the appliance
can lead to fi re and property damage.
■ Only connect the appliance to a
properly installed and earthed elec-
tric socket. Do not connect to a mul-
ti-socket extension cable or a mul-
ti-socket plug.
NOTICE
Risk of damage!
If the appliance has been transported
horizontally, lubricant from the com-
pressor may make its way into the cool-
ing circuit.
■ Allow the appliance to stand upright
for approx. 2 hours after transporta-
tion and before connecting. This al-
lows the lubricant enough time to
fl ow back into the compressor.
• Insert the mains plug into an easily acces-
sible and properly installed socket (220-
240 V~ / 50 Hz).
When opening and closing the upper
door, the interior lighting (1) is automati-
cally switched on and off.
You will find all important information
about operation on page EN-11.
Set-up
Page EN-25
To Next Page
Loading...
Need help?
General
