Why is my Hanseatic Vacuum Cleaner not working?
The Hanseatic Vacuum Cleaner may not be working because it is switched off. To resolve this, simply switch the appliance on. Alternatively, the battery performance might be too low. In this case, place the appliance in the charging station to charge the battery.
Why does my Hanseatic Vacuum Cleaner have weak suction?
If your Hanseatic Vacuum Cleaner's suction force is weak, it might be due to a filter that is either inserted incorrectly or is contaminated. Try inserting the filters correctly and cleaning them. Another possible cause is low battery performance; in this case, place the appliance in the charging station and charge the battery.
Why does my Hanseatic HVRB25SS Vacuum Cleaner keep switching off?
The Hanseatic Vacuum Cleaner might be switching itself off due to several reasons. First, the brush or floor nozzle could be blocked. If this is the case, switch off the appliance and clean the brush or floor nozzle. Second, the filter might be blocked, activating the overheat protection. To fix this, switch off the appliance, let it cool for at least 30 minutes, and then clean the filter. Lastly, low battery performance can also cause this issue; place the appliance in the charging station and charge the battery.
What to do if dust is escaping from Hanseatic HVRB25SS?
If dust is escaping from your Hanseatic Vacuum Cleaner, it's likely that the filter is either inserted incorrectly or is contaminated. Make sure to insert the filters correctly and clean them thoroughly.
What does it mean when the red light flashes 7 times on my Hanseatic HVRB25SS?
If the red light on your Hanseatic Vacuum Cleaner flashes 7 times and you hear a beep, it means the battery is not sufficiently charged. Return the appliance to the charging station to resolve this.
What does it mean when the red light flashes 9 times on my Hanseatic HVRB25SS Vacuum Cleaner?
If the red light on your Hanseatic Vacuum Cleaner flashes 9 times and you hear a beep, it indicates that the roller-brush is blocked. Check whether the roller-brush is blocked and, if necessary, loosen any dirt particles or foreign bodies causing the blockage.
What does it mean when the red light flashes 2 times on my Hanseatic Vacuum Cleaner?
If the red light on your Hanseatic Vacuum Cleaner flashes 2 times and you hear a beep, it means the left wheel is not turning, possibly due to being overloaded. Check if the left wheel is blocked. If needed, remove any dirt particles or foreign objects causing the blockage.
What does it mean when the red light flashes 3 times on my Hanseatic Vacuum Cleaner?
If the red light on your Hanseatic Vacuum Cleaner flashes 3 times and you hear a beep, it indicates that the right wheel is not turning, possibly because it's overloaded. Check if the right wheel is blocked, and if necessary, remove any dirt particles or other foreign objects that are causing the blockage.
What does it mean when the red light flashes 5 times on my Hanseatic HVRB25SS?
If the red light on your Hanseatic Vacuum Cleaner flashes 5 times and you hear a beep, it indicates that the front wheel is not turning, possibly due to being overloaded. Check whether the front wheel is blocked. If necessary, loosen any dirt particles or other foreign bodies that cause the blockage.
What does it mean when the red light flashes 10 times on my Hanseatic HVRB25SS Vacuum Cleaner?
If the red light on your Hanseatic Vacuum Cleaner flashes 10 times and you hear a beep, it indicates that a side brush is blocked. Check if a side brush is blocked, and if necessary, loosen dirt particles or other foreign bodies that cause the blockage.
General| Brand | Hanseatic |
|---|---|
| Model | HVRB25SS |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
