Hanseatic Premium Line VCB46A15F-70 User Manual (English)

Questions and Answers:

N
Nancy KelleyAug 11, 2025
Why is my Hanseatic Vacuum Cleaner suction weak?
- A
  Amy KellyAug 11, 2025
  There are several reasons why your Hanseatic Vacuum Cleaner might have weak suction. It could be due to: - The dust bag not being positioned correctly, so ensure it is inserted correctly. - The dust bag is full, so replace the dust bag. - The brush or nozzle is not positioned correctly, so position it correctly. - An object is plugging the nozzle. In this case, actuate the On/Off foot switch, pull out the mains plug, check the telescopic tube and suction hose for blockage, and remove the object. - The filters are inserted incorrectly or are dirty, so insert the filters correctly and/or clean them. - The air by-pass vent is open, so close the air by-pass vent.
L
livingstonandrewAug 20, 2025
What to do if my Hanseatic Vacuum Cleaner switches itself off?
- V
  Vanessa PadillaAug 20, 2025
  If your Hanseatic Vacuum Cleaner switches itself off, it could be due to a few reasons: 1. The brush or nozzle might be blocked. To resolve this, actuate the On/Off foot switch, pull out the mains plug, and clean the brush/nozzle. 2. The motor protection filter might be blocked, or the overheat protection has been activated. To fix this, actuate the On/Off foot switch, pull out the mains plug, leave the appliance to cool for at least 1/2 hour, and clean the motor protection filter. 3. The telescopic tube or suction hose could be blocked. To address this, actuate the On/Off foot switch, pull out the mains plug, check the telescopic tube and suction hose for blockage, and clean if necessary.
J
Julie MejiaAug 27, 2025
What to do if dust is escaping from my Hanseatic Vacuum Cleaner?
- L
  Lindsay MooreAug 27, 2025
  If dust is escaping from your Hanseatic Vacuum Cleaner, it could be because the dust bag is full (change the dust bag), the dust bag is not positioned correctly (insert the dust bag correctly), or the filters are inserted incorrectly or are dirty (insert filters correctly and/or clean).
J
Julia HallSep 3, 2025
How to fix a Hanseatic Vacuum Cleaner that is not working?
- C
  Cesar HenrySep 3, 2025
  If your Hanseatic Vacuum Cleaner is not working, consider the following: * Ensure the On/Off foot switch is actuated to switch the appliance on. * Check that the mains plug is firmly inserted into the socket. * Try the appliance with a different socket in case the current socket is defective. * Check the fuses and/or circuit breakers. * Inspect the mains cord for damage. If damaged, contact the Service Centre.