To Next PageTo Next PageWhat does error E10 mean on my Hanseatic HWMK814A?
– The water pressure, to which the appliance is connected may be too low or the valve may be closed. If necessary, open the valve completely. – If necessary, loosen any twists or knots in the water inlet hose.
What does error E30 mean on my Hanseatic HWMK814A Washer?
Close the appliance door properly and restart the cycle.
Why can't I open the door of my Hanseatic Washer after the cycle finishes?
The opening mechanism of your Hanseatic Washer contains a safety device that keeps the appliance door closed for approximately 2 minutes after the end of the wash cycle.
Why is fabric softener not dispensing in my Hanseatic HWMK814A Washer?
If the fabric softener or fabric-care product was not dispensed in your Hanseatic Washer, the insert in the fabric softener/starch compartment was not inserted properly or is clogged. Remove the insert, clean it, and then re-insert it properly.
How to improve wash results in Hanseatic HWMK814A?
If the wash result of your Hanseatic Washer is unsatisfactory, make sure you are dispensing enough detergent according to the manufacturer's instructions, especially considering the water hardness in your area. Avoid overloading the drum. If needed, increase the water temperature or select a different wash cycle. Also, pretreat stains with ox-gall soap or stain remover.
How to remove mould stains from laundry washed in my Hanseatic Washer?
If your laundry has mould stains after being washed in your Hanseatic Washer, it's likely because damp and/or worn laundry was left in the washing drum. Remove mould stains carefully before the next wash, preferably with a special cleaner.
Why have the colors of my laundry faded after washing in my Hanseatic HWMK814A?
If the colors of your laundry have faded after washing in your Hanseatic Washer, it could be due to the detergent containing a bleaching agent. If necessary, use a color freshener. In the future, use a detergent without a bleaching agent.
Why is my laundry discoloured after washing in my Hanseatic HWMK814A Washer?
If your laundry is discoloured after washing in your Hanseatic Washer, it may be because the laundry was washed at a temperature that was too hot. If necessary, bleach laundry carefully.
Why is the spin cycle slow on my Hanseatic HWMK814A Washer?
If the spin cycle on your Hanseatic Washer is not running or is slow, it may be because the imbalance correction system for imbalanced drum loads is running. No action is needed; once the laundry is distributed evenly, the spin cycle will start automatically.
Why is my Hanseatic Washer leaking water?
If your Hanseatic Washer is leaking water, check whether the inlet or outlet hose is not screwed on tightly enough and screw the water inlet or outlet hose tighter. Also ensure that the lint trap is properly closed.
General