To Next PageTo Next PageWhy is the spin cycle not running on my Hanseatic Washer?
If the spin cycle on your Hanseatic Washer is not running or is slow, the imbalance correction system for imbalanced drum loads may be running. This is not an error. Once the laundry is distributed evenly, the spin cycle will start automatically.
How to fix a Hanseatic Washer that does not work?
If your Hanseatic Washer isn't working, first ensure the mains plug is correctly inserted into the socket. Then, check if the socket has voltage and switch it on if necessary. Finally, inspect the fuse and replace it if it's not intact.
What to do if my Hanseatic Washer is not receiving water (error code E10)?
If your Hanseatic Washer isn't receiving water and displays error code E10, first ensure the tap is open. Next, check the inlet hose for any kinks and realign if necessary. Also, the inlet hose or the filter at the inlet may be clogged. Clean the filter in the inlet hose or clean the filter at the inlet.
Why is there too much foam in my Hanseatic Washer?
If your Hanseatic Washer is creating too much foam during the wash cycle, it could be due to using too much detergent, so use less next time. Alternatively, the detergent might not be suitable for washing machines, so use a detergent specifically designed for washing machines.
How to fix a Hanseatic Washer when water is not being pumped out?
If water isn't being pumped out of your Hanseatic Washer, check the outlet hose for clogs or kinks and realign it if necessary. Also, the lint trap might be clogged, so clean it.
What to do if the wash cycle does not start on my Hanseatic HWMB814B?
If the wash cycle on your Hanseatic Washer isn't starting, ensure the appliance door is properly closed until you hear a 'click'. If it is closed properly, make sure you press the start button.
What to do if the Hanseatic HWMB814B door won't open after the cycle?
If the appliance door of your Hanseatic Washer cannot be opened after the wash cycle has finished, this is not an error. The opening mechanism contains a safety device that keeps the door closed for a couple of minutes after the wash cycle has finished. Press the power button to switch the appliance off, wait a few minutes, and then open the door.
Why is fabric softener not dispensing in my Hanseatic HWMB814B Washer?
If the fabric softener or fabric-care product wasn't dispensed by your Hanseatic Washer, the insert in the fabric softener/starch compartment may not have been installed properly or is clogged. Remove the insert and install it again properly; clean it if necessary.
Why have the colours of my laundry faded after using my Hanseatic HWMB814B Washer?
If the colours of your laundry have faded after washing in your Hanseatic Washer, the detergent may contain a bleaching agent. Use a colour freshener if necessary. In the future, use a detergent without a bleaching agent.
How to fix error code E30 on my Hanseatic HWMB814B?
If your Hanseatic Washer displays error code E30, it means the appliance door is not properly closed. Close the door properly until you hear a ‘click’.
Lists items included in the product delivery package.
Instructions for verifying all delivered items are present and undamaged.
Specifies the appliance's designed purpose and limitations for household use.
Defines symbols used in the manual, indicating hazard levels and notes.
Provides general safety instructions to observe for personal protection and third-party safety.
Highlights dangers children face, such as suffocation and entrapment in the drum.
Covers hazards like poisoning from detergents and fire risks from improper handling.
Details the buttons, display, and selector for operating the appliance.
Describes the door, handle, and dispensing drawer for loading and detergent.
Covers water hoses, electrical connections, transport devices, and lint trap.
Explains symbols for remaining time, start delay, and cycle progress.
Details symbols for specific functions like extra rinse, pre-wash, and child lock.
Explains how to adjust default settings for selected cycles using buttons.
Instructions on how to properly place clothes into the drum.
Guidance on filling the detergent compartments for different wash cycles.
Preparation steps, including safety and connection checks.
Step-by-step guide to initiating a wash program.
Instructions and conditions for adding clothes mid-cycle.
Feature to reduce cycle duration for lightly soiled laundry.
Allows delaying the start of a wash cycle up to 24 hours.
Prevents accidental operation by locking the controls.
Indicates appliance status, button presses, and fault messages.
Procedure to empty water from the appliance, e.g., after cancellation.
Allows saving user-adjusted wash cycles for frequent use.
Guides on how to save adjusted wash cycle settings.
Explains how to select and run a previously saved custom cycle.
Advice on preparing laundry and sorting it by fabric type, colour, and dirt level.
Tips for washing delicate items like socks, stockings, and curtains.
Guidance on efficient washing practices and cycle selection.
Information on maximum load capacity and weight guidelines.
Recommendations for suitable detergents and what to avoid.
Guidance on using the correct amount of detergent based on water hardness and load.
System that adjusts rinse cycles based on foam levels.
Prevents water leakage by activating the outlet pump.
Adjusts water and cycle duration based on load size.
Manages drum imbalance during spin cycles for stability.
Routine inspections for hoses, lint trap, and door seal.
Guidelines for cleaning the appliance to prevent issues like limescale.
Specific steps for cleaning the door and rubber seal.
Instructions for wiping the drum and leaving the door open for drying.
Steps for removing, rinsing, and cleaning the detergent drawer.
Procedure for cleaning the filter in the water inlet hose.
Steps to clean the lint trap to remove debris.
Safety precautions and methods for moving the washing machine.
Instructions for removing and installing securing devices during transport.
Requirements for the installation site and positioning the appliance.
Steps to level the appliance using the adjustable feet.
Safety guidelines for connecting the appliance to the power supply.
Instructions for the initial empty wash cycle to rinse residues.
Contact points for inquiries, orders, and complaints.
Information on obtaining repairs and replacement components.
Guidelines for environmentally sound disposal of electronic waste.
Details on the recyclable materials used for the appliance packaging.
General