Hantek Hantek1025G - Synchronized Output

Hantek1025G
USER’S MANUAL 27
3.8 Synchronized output
If you generate a waveform by software, there is a synchronized signal output from “SYNC”
terminal. The signal is square waveform, the frequency of which is equal to the waveform
you generated.
For example, if you generated a 1 KHz, sine waveform, you will also generate an 1 KHz,
square waveform simultaneously.
The waveform on CH1 is the sine waveform you generated from the “OUTPUT” BNC
terminal, and that on CH2 is the synchronized signal from “SYNC OUT” BNC terminal.