Need help?Do you have a question about the Haojue EG150 and is the answer not in the manual?
General| Engine Type | Single cylinder, 4-stroke, air-cooled |
|---|---|
| Fuel System | Carburetor |
| Transmission | 5-speed |
| Ignition | CDI |
| Front Brake | Disc |
| Rear Brake | Drum |
| Tire (Front) | 2.75-18 |
| Tire (Rear) | 90/90-18 |
| Displacement | 149.2 cc |
| Fuel Tank Capacity | 12.5 liters |
| Starting System | Electric and kick start |
| Length x Width x Height | 745 mm |
Explains the meaning of WARNING, CAUTION, NOTICE, and NOTE symbols used in the manual.
Guidelines for safe installation of accessories and motorcycle loading.
Locating the Vehicle Identification Number (VIN) and Engine Number.
Importance of wearing a helmet and eye protection for safety.
Advice on choosing appropriate and safe riding clothing.
Emphasizes performing a thorough safety inspection before riding.
Recommends practicing in a safe environment to learn controls.
Advises riding within personal skill limits for safety.
Provides advice for riding safely on poor or slippery road conditions.
Warns against riding at excessive speeds or high engine speeds.
Information on the main and spare keys and how to keep them safe.
Details the positions and operation of the ignition switch.
Explains the functions of the odometer, speedometer, and trip meter.
Describes the operation and interpretation of the fuel gauge and tachometer.
Details the various indicator lights on the dashboard and their meanings.
Operation of the dimmer switch for headlights and the overtaking switch.
Explains the function of the clutch lever, horn button, and turn signal switch.
Operation of the light switch and the electric starter button.
How to control engine speed using the throttle grip.
How to apply the front brake using the lever.
Explains the 'open', 'reserve', and 'off' positions of the fuel cock.
Details the operation of the 5-speed gear shift lever.
How to adjust the rear shock absorber spring pre-load.
How to apply the rear brake using the pedal.
Instructions for using the kick start lever.
Information on the main and side stands for parking.
Instructions for using the main and side stands for parking.
Specifies the maximum load capacity of the rear carrier.
Specifies the recommended unleaded gasoline octane rating.
Guidelines for selecting the appropriate engine oil and its classification.
Advice on throttle usage during the break-in period.
Importance of changing gears and engine speeds during break-in.
Guidance on breaking in new tires for optimal performance.
Warning against maintaining constant low speed during break-in.
Advises allowing oil circulation before riding a cold engine.
Highlights the importance of the initial 1000 km maintenance service.
Checks for steering stability, play, and brake system condition.
Inspecting tire pressure/condition, fuel level, and lights.
Verifying the proper function of indicators and control switches.
Checks for engine oil level, throttle play, clutch operation, and drive chain.
Provides tips for first-time riders and general riding safety.
Covers warnings related to one-handed riding, turns, and road conditions.
Detailed steps for starting a cold and warm engine.
Lists key items requiring inspection and their intervals.
Details maintenance intervals for various motorcycle components.
Table listing points needing lubrication and their service intervals.
Step-by-step guide for removing the motorcycle battery.
Instructions for correctly installing the motorcycle battery.
Steps for removing and cleaning the air filter element.
Cautions regarding air filter cleaning, inspection, and installation.
How to inspect the spark plug for proper operation and gap.
Information on selecting and replacing the spark plug.
Proper procedure for installing a spark plug.
How to check the engine oil level using the dipstick.
Steps for changing engine oil and cleaning the oil strainer.
Detailed procedure for replacing the engine oil and strainer.
How to inspect and adjust the clutch cable gap.
Steps for adjusting the clutch cable play.
Procedure for adjusting the engine's idle speed.
How to check and adjust the throttle cable play.
Instructions for inspecting, cleaning, or replacing the fuel filter.
How to clean and lubricate the drive chain for optimal performance.
How to adjust the drive chain tension (sag).
General information about the motorcycle's brake system.
How to adjust the free stroke of the front brake lever.
How to check the wear limit of the front brake pads.
How to adjust the free stroke of the rear brake pedal.
How to check the wear limit of the rear brake shoes.
How to check tire pressure and surface condition for safety.
Location and function of front and rear brake light switches.
Guidance on replacing bulbs and checking fuses.
Information on correct fuse selection and related warnings.
Steps to check the ignition system if the engine fails to start.
Guidelines for safely draining fuel before transporting the motorcycle.
Steps for preparing the motorcycle for storage, including fuel and battery.
Steps for preparing the motorcycle after storage or for re-service.
Procedures for activating and installing the motorcycle battery.
Guidelines for proper battery usage, maintenance, and safety precautions.
Technical data on the motorcycle's dimensions and weight.
Details of the engine type, displacement, power, and other specs.
Technical data on the clutch, transmission, and gear ratios.
Data on fuel consumption, speed, climbing ability, and riding parameters.
Specifications for electrical components, battery, fuse, lights, and fluid capacities.
To Next Page
