Need help?Do you have a question about the Harbinger APS15 and is the answer not in the manual?
Instructions pertaining to fire, electric shock, or injury risks during operation.
Two MIC input pairs accepting 1/4" jack and XLR connections for microphones.
Accepts line-level signals via Dual RCA jacks or single XLR connector.
Sends signal out before the power amp for connecting to other speakers.
Switches the unit on or off. Master level should be down before powering on.
Power socket with fuse holder and AC input connection.
Adjusts overall equalization to prevent feedback and enhance audio tone.
Controls the input level for the MIC channels.
Controls the input level for the LINE channels.
Adjusts the final output level of the speaker.
LED illuminates when output signal exceeds amplifier capacity; reduce input signal.
Details frequency response, SPL, and crossover specifications.
Details MIC and LINE input types, impedance, and sensitivity.
Specifies the type, frequency points, and range of the graphic equalizer.
Details rated output power, supply voltage, consumption, and THD.
Details the two-year limited warranty on materials and workmanship.
Warning regarding chemicals known to cause cancer or reproductive harm in California.
To Next Page
General