To Next PageTo Next Page
Need help?Do you have a question about the Harbor Breeze 00728 and is the answer not in the manual?
General| Brand | Harbor Breeze |
|---|---|
| Model | 00728 |
| Type | Ceiling fan |
| Number of Blades | 5 |
| Motor Speeds | 3 |
| Control Type | Pull chain |
| Remote Control Included | No |
| ENERGY STAR Certified | No |
| Reversible Motor | Yes |
| Blade Span | 52 inches |
| Motor Type | AC |
Do not install with variable speed wall control or wall-mounted dimmer switch; it will damage the fan.
Mount to an outlet box marked 'ACCEPTABLE FOR FAN SUPPORT OF 35.1 lbs OR LESS'.
Install fan so blades are 7 ft. (2.1m) above the floor to prevent injury.
Secure mounting plate to outlet box, pulling wires through.
Hang fan motor on mounting plate hook, avoiding dimmer/speed controls.
Connect fan wires (black, white, ground) to corresponding ceiling wires.
Align keyhole slots, lift, rotate, and securely tighten fan motor to mounting plate.
Remove stabilizer tabs and secure blades to fan motor using blade screws.
Connect wires, align keyhole slots, and lock light fixture to light plate.
Align glass with dimples in light fixture, insert, and turn clockwise.
Install wall bracket to house the remote control at a desired location.
Install battery and pair remote control with fan receiver by using the learn key.
Operate fan speeds (low, medium, high) and turn light on/off, with dimmer function.
Flip fan reversal switch to change blade rotation direction for cooling or heating.
Diagnose and correct common problems like fan not moving, noise, or wobbling.
Address issues like no sound, no transmitter LED flash, or remote not working.
Details on manufacturer's warranty, limitations, and how to obtain service.
