To Next PageTo Next Page
Need help?Do you have a question about the Harbor Breeze ANIVA BAY and is the answer not in the manual?
General| Brand | Harbor Breeze |
|---|---|
| Model | ANIVA BAY |
| Category | Fan |
| Language | English |
Key warnings for safe installation, including power, site, wiring, and blade handling.
Thread downrod into motor support, align holes, and secure with clevis pin and set screws.
Securely attach the hanger bracket to the outlet box using provided screws and washers.
Carefully lift fan assembly and rest hanger ball on hanger bracket, ensuring groove alignment.
Connect grounding wires, white (neutral) wire, and black (hot) wire using wire connectors.
Tighten fan blades at the bottom of the motor assembly using screws and fiber washers.
Restore electrical power to the outlet box by turning on the main fuse box.
Warning against using variable (Rheostat) wall controllers or dimmer switches with the fan.
Explains functions like fan speed, power, reverse, light control, light delay, home shield, and sleep timer.
Addressing fan wobble by checking downrod set screws and blade balance.
Further steps for fan wobble including tightening hanger bracket screws and rebalancing blades.
