Harbor Breeze BRADBURY BRD48BNK6LRS User Manual (English)

Questions and Answers:

H
Holly GloverAug 5, 2025
How to fix a Harbor Breeze BRADBURY BRD48BNK6LRS Fan that does not move?
- C
  Christopher WalkerAug 5, 2025
  If your Harbor Breeze Fan isn't moving, start by checking the reverse switch and ensure it's fully engaged by pushing it firmly either left or right. Then, verify that the power is on and the fuse hasn't blown. If these aren't the issue, turn off the power, loosen the canopy, and inspect all wire connections for any faults. Also, check that the molex connections in the LED light kit are properly connected according to the instructions.
R
Randall McbrideAug 13, 2025
What to do if my Harbor Breeze BRADBURY BRD48BNK6LRS is working but the lights aren't?
- W
  whitemelissaAug 13, 2025
  If your Harbor Breeze Fan operates but the lights fail, first check the wires in the canopy and, if needed, rewire them according to the instructions. Ensure the wall switch to the fan is turned on. Also, check the wires from the LED light kit and, if necessary, rewire them according to the instructions.
G
Gabriel CastilloAug 19, 2025
Why is my Harbor Breeze BRADBURY BRD48BNK6LRS wobbling so much?
- O
  ohughesAug 19, 2025
  If your Harbor Breeze Fan is wobbling excessively, several factors could be the cause. First, ensure that all motor screws and washers are tightened. If the issue persists, try switching one blade with a blade from the opposite side to address potential imbalances. Also, turn the power off and carefully loosen the canopy to check that the mounting bracket is securely attached. If your fan is too close to a vaulted ceiling, consider using a longer downrod or moving the fan. Finally, make sure that the set screws on the motor housing yoke and the hanging ball are properly tightened.
L
Lauren ShawAug 28, 2025
Why is my Harbor Breeze BRADBURY BRD48BNK6LRS Fan making so much noise?
- L
  Lisa StevensAug 28, 2025
  If your Harbor Breeze Fan is operating noisily, begin by tightening all motor screws and washers, as loose blades can be a common cause. Inspect each blade for cracks and replace any that are damaged. If the fan is new, allow it a "break in" period of a few days, especially when running the fan at medium and high speeds, as this can sometimes reduce noise.

Harbor Breeze BRADBURY BRD48BNK6LRS Specifications

General

Brand	Harbor Breeze
Model	BRADBURY BRD48BNK6LRS
Category	Fan
Motor Type	AC
Control Type	Remote Control
Finish	Brushed Nickel
Number of Speeds	3
Indoor/Outdoor	Indoor
Finish Family	Nickel
Reversible Motor	Yes
Light Type	LED
Number of Light Bulbs	1
Dimmable	Yes
Warranty	Limited Lifetime
Blade Span	48 inches
Light Kit	Yes
Mounting Options	Downrod
Room Size	Medium
Energy Efficiency	High Efficiency