Press the
“MEMORY”
button
14
You can recall up to 90 total measurements in memory, plus an average of the last 3
stored measurements in memory to share with your physician or trained healthcare
professional.
Memory Function
Recalling Measurements in Memory:
1. Press and release the “MEMORY” button. The unit will first display the average of
the last 3 stored measurements.
3. All results for a given measurement will display, including measurement results,
pulse rate, Hypertension Indicator, and date/time stamp.
4. When the number of readings exceeds 90, the oldest data will be replaced with
the new record.
5. Press the Power button to turn the monitor OFF at any time during review of the
stored measurements.
2. Continue to press the “MEMORY” button to
successively view the next previously stored
measurements. Measurements will appear on
the display from most current to oldest; the
memory number will appear on the lower right
corner.
To Next Page
Loading...