Harbor Freight Tools DOYLE

Need help?

Do you have a question about the Harbor Freight Tools DOYLE and is the answer not in the manual?

Summary

Owners Manual & Safety Instructions

Product Warning

Read this material before using. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Specifications

Compatible Nut Rivets

Lists compatible nut rivet sizes: 10-24, 1/4-20, 5/16-18, M5, M6 and M8.

Operation Instructions

Mandrel Installation

Steps for removing the nut and mandrel, then installing the desired mandrel and securing it.

Rivet Installation

Steps for threading a rivet onto the mandrel, inserting it through a hole, and securing it.

Summary

Owners Manual & Safety Instructions

Product Warning

Read this material before using. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Specifications

Compatible Nut Rivets

Lists compatible nut rivet sizes: 10-24, 1/4-20, 5/16-18, M5, M6 and M8.

Operation Instructions

Mandrel Installation

Steps for removing the nut and mandrel, then installing the desired mandrel and securing it.

Rivet Installation

Steps for threading a rivet onto the mandrel, inserting it through a hole, and securing it.

The device described in the manual is a Doyle 10" Professional Rivet Nut Setter Kit, designed for installing rivet nuts.

Function Description

The Doyle 10" Professional Rivet Nut Setter Kit is a hand-operated tool used for setting rivet nuts into pre-drilled holes. Rivet nuts, also known as blind rivet nuts or threaded inserts, are fasteners that can be installed from one side of a workpiece, providing a threaded hole for subsequent fastening. This tool facilitates the secure installation of these nuts by threading the rivet nut onto a mandrel, inserting it into a hole, and then squeezing the handles to deform and secure the rivet nut. The tool is designed for professional use, suggesting durability and reliability for frequent or demanding applications.

Important Technical Specifications

Product Name: Doyle 10" Professional Rivet Nut Setter Kit
Compatible Nut Rivets: The kit is compatible with a range of nut rivet sizes, including:
- Imperial: 10-24, 1/4-20, 5/16-18
- Metric: M5, M6, M8
Tool Size: 10 inches (referring to the length of the tool, likely for leverage)
Manufacturer: Harbor Freight Tools (Doyle is a trademark of Harbor Freight Tools)
UPC: 193175432124
Model/Item Number: 58078
Copyright: 2020 by Harbor Freight Tools®

Usage Features

The manual outlines a straightforward process for both mandrel installation and rivet nut installation, emphasizing ease of use:

Mandrel Installation:

Removal of Existing Nut: The user first removes the existing nut from the tool using a wrench.
Removal of Existing Mandrel: The existing mandrel is then removed.
Installation of Desired Mandrel: The appropriate mandrel, matching the size of the rivet nut to be used, is installed.
Securing with Matching Nut: The newly installed mandrel is secured with its corresponding nut.

Rivet Installation:

Open Handles: The tool's handles are opened to prepare for rivet nut loading.
Thread Rivet onto Mandrel: The rivet nut is threaded onto the installed mandrel.
Insert Rivet through Predrilled Hole: The rivet nut, attached to the tool, is inserted into a pre-drilled hole in the workpiece.
Squeeze Handles: The handles are squeezed together firmly. This action pulls the mandrel, deforming the rivet nut and securing it in place.
Twist Riveter Down to Remove: After the rivet nut is set, the riveter is twisted downwards to disengage it from the newly installed threaded insert.

Safety Features and Guidelines:

Setup: The tool should only be set up according to the provided instructions to prevent hazards.
Personal Protective Equipment (PPE): Users are instructed to wear ANSI-approved safety goggles and heavy-duty work gloves during setup and use.
Work Area: The work area must be kept clean and well-lit.
Bystanders: Bystanders should be kept out of the work area during setup and use.
User Condition: The tool should not be set up or used when the operator is tired or under the influence of alcohol, drugs, or medication.
Not a Toy: The product is explicitly stated not to be a toy, and children should not be allowed to play with it.
Intended Use: The tool is to be used only as intended.
Pre-Use Inspection: Before every use, the tool must be inspected. It should not be used if any parts are loose or damaged.
Warning: A prominent warning advises users to read all safety information before using the product to prevent serious injury.

Maintenance Features

The manual provides limited specific maintenance instructions but implies general care and inspection:

Inspection: Users are instructed to "Inspect before every use; do not use if parts are loose or damaged." This suggests a routine visual inspection is the primary maintenance action.
Replacement Parts: The manual explicitly states: "Replacement parts not available." This indicates that if a component of the tool breaks or wears out, individual parts cannot be ordered for repair. This might imply that the tool is designed for a long service life without component replacement, or that in case of significant damage, the entire unit may need to be replaced.
Cleaning: While not detailed, the instruction to "Keep work area clean and well lit" indirectly supports keeping the tool clean as well, which is a general good practice for tool longevity.
Storage: The manual advises keeping the manual and receipt in a "safe and dry place for future reference," which also implies that the tool itself should be stored in a safe and dry environment to prevent damage and corrosion.

Warranty Information

The Doyle 10" Professional Rivet Nut Setter Kit comes with a Limited Lifetime Warranty from Harbor Freight Tools.

Coverage: The warranty covers defects in materials and workmanship for the product's useful life.
Remedy: If the product does not perform according to the warranty, Harbor Freight Tools will, at its option and expense, repair or replace the product, or refund the purchase price. This is the sole and exclusive remedy for the purchaser.
Obtaining Service: To obtain warranty service, the product must be returned with proof of purchase to a Harbor Freight Tools retail store or returned by mail after contacting Harbor Freight Tools Product Support at 1-888-866-5797 and receiving a return authorization.
Exclusions: The warranty excludes normal wear and tear and does not cover products subjected to misuse, use or operation not in accordance with the product manual, abuse, accident, modification or alteration, unauthorized repair, improper storage, neglect, or lack of maintenance.
Limitations: Harbor Freight Tools is not liable for incidental, indirect, special, consequential, or punitive damages or costs arising from the use of the product. The warranty provides specific legal rights, which may vary by state.