Time-Lapse Package
Revision E
Tools and Accessories
A hex key wrench, and triangular door key is provided with the Time-Lapse Package, to allow reconfiguration of the camera
position, the solar panel, the mounting brackets, and to open / lock the door
A desiccant pack is included in the housing to minimize
internal moisture, which can cause condensation during
temperature extremes. If the crystals eventually turn pink,
bake the pack in an oven at 150C / 350F for an hour or more,
until they turn blue again. Be careful not to melt the package!
We also include a sheet of black felt, in case you need to
absorb any other stray internal light reflections. If you are able
to position the front of the lens near the inside surface of the
glass, this will eliminate reflections as well.
An extra set of plastic door locks are also provided.
Standard Package
This is the normally recommended package, comprising everything required to perform completely autonomous time-lapse
photography in the field. All of the above sub-assemblies are included. The retail price for this package is US$2300. Each system is
configured and tested at our factory.
Harbortronics Inc 12 10/7/2008
To Next Page
Loading...
