5
www.hardlifeutility.c om
ASSEMBLY AND INSTALLATION
You can install the C2620 / C2640 Hardlife container shelter with a 3–4 member team of your own in 1–2
days, by carefully following the instructions provided in this Instruction Manual.
WARNING
Ensure that you do not leave this product partially assembled, as it can pose serious dangers
CAUTION
Ensure that all the components are securely tted before use.
TOOLS REQUIRED FOR INSTALLATION
1. Measuring tape
2. String for alignment
3. Step ladder
4. Sledge hammer
5. Wrench
6. Knife
7. Welding Machine
8. Scissors
SITE PREPARATION
To prepare the site for installing the shelter:
1. Select a at, hard, and level surface.
2. Ensure that all the components are present by checking with the Component List prior to installation.
3. Mark out a site using a string or chalk. It is recommended that the string or chalk line is slightly larger
than the shelter area
4. Lay out all the components within this site, in the approximate locations at which they will be assembled.
e containers, base plates, and square tubes will be placed within this marking. is makes preliminary
work easier on an open, clear space rather than having parts scattered in the way.
To Next Page
Loading...
Need help?
General
