Need help?Do you have a question about the Harig AUTOMATIC PLC and is the answer not in the manual?
General| Spindle Speed | 3450 RPM |
|---|---|
| Weight | 1200 lbs |
| Longitudinal Travel | 12 in |
| Cross Travel | 6" |
| Vertical Travel | 10 in |
Critical safety and connection procedures for electrical services by authorized personnel.
Causes and solutions for vibration issues affecting the finished surface.
Diagnosing and fixing issues causing scratchy or lined finishes.
Identifying and correcting sources of grinding inaccuracies.
Troubleshooting steps for when motors fail to start or operate correctly.
Addressing inconsistent or erratic downfeed adjustments.
Resolving problems with the table's automatic forward/backward movement.
To Next Page