5
CUSTOMER PREVENTATIVE MAINTENANCE CHECK LIST
Daily:
□ Check the way lube level. Fill as needed.
□ Check the ways for proper oiling. If more oil is needed, turn oil adjustment
control 1/8 of a turn, observe performance and increase if needed.
□ Clean machine with vacuum and/or treated dust cloth. (Caution: Do not use air
blast.)
□ Check the lube lines for leaks.
□ Check the table for smooth operation; make sure there is oil on the ways. Check
the operation of the coolant pump. Clean the tank and change the coolant if
needed.
□ Check the spindle for noisy operation.
□ Make maintenance recommendations for any potential problems found.
Every 1000 hrs of run time:
□ Clean the oil pump filter, clean the reservoir and change the oil.
□ Check the lube lines for leaks.
□ Check the hydraulic pump pressure, fluid level and filter. Clean the filter if
needed. Harig® Hydraulic Oil, Single Gallon- Part No. 16211213
□ Check the axis belts.
□ Check the axis motors for noise or excessive heat.
□ Make maintenance recommendations for any potential problems found.
Every 5000 hrs of run time:
□ Replace the Hydraulic Oil. Harig® Hydraulic Oil, Single Gallon- Part No.
16211213
Every 6 months:
□ Check the level of the machine.
To Next Page
Loading...