2005 PDI: VRSC Models 6-1
SPECIFICATIONS 6.1
TORQUE VALUES
The following torque values are included for fasteners that
may be loosened and tightened during Predelivery and
Setup. Any fasteners that are not loosened/removed do not
need to be checked during Predelivery and Setup.
2005 VRSC MODELS
SPECIFICATIONS
ITEM TORQUE NOTES
Front axle nut 68-75 Nm 50-55 ft-lbs
Rear axle nut 129-142.36 Nm 95-105 ft-lbs
All master cylinder cover screws 0.7-0.90 Nm 6-8 in-lbs
Battery terminal screws 6.8-10.9 Nm 60-96 in-lbs
Coolant air bleed plug 9-11 Nm 80-97 in-lbs
Radiator drain plug – – Hand-tighten
Table 6-1. Capacities
Component Metric English
Fuel tank total 14.0 liters 3.7 gal.
Oil sump 4.3 liters 4.5 qt.
Coolant 2.4 liters 2.54 qt.
1
To Next Page
Loading...