2008 MODEL YEAR TECHNICAL FORUM VRSC
™
NEW ABS Brakes cont.
• ABS lines are designed to ease
assembly
• Invisible to the motorcycle
• Wheel speed sensor have specific
care and usage instructions
found in 2008 service manual
• Wheel speed sensors have
locating tab and must be oriented
prior to applying torque to axle nuts
• Voltage regulator relocated as ABS
module needed voltage regulator
relocation to radiator cover
FL spacer shown
2008 MODEL YEAR TECHNICAL FORUM VRSC
™
NEW ABS Brakes cont.
• ABS speed sensor pickup
located in wheel bearing
• ABS bearings have the gray
side of the bearing facing outward
• ABS system will not retrofit
to earlier models
FACES
OUT
FACES
IN
To Next Page