2008 MODEL YEAR TECHNICAL FORUM BUELL
®
NEW Intake Flanges and Bolt Hole Location
• No change to ports
• New intake flanges and fastener
orientation improve assembly and
service access
• Common with Sportster
®
models
• New intake flanges use current
intake seals
2008 MODEL YEAR TECHNICAL FORUM BUELL
®
NEW Pre-crushed Head Gasket
• O-ring no longer required
• No other procedural change
• Supersedes prior gaskets
Important Service Note:
Service kits may contain the o-rings
for prior model years. Do not use
O-rings with this new head gasket.
To Next Page