2008 MODEL YEAR TECHNICAL FORUM BUELL
®
NEW Oil Pump cont.
• All threaded fittings and oil lines
have been updated with jiffy-tite
fittings which connect in oil pump
cover
• Higher output and scavenge
capacity gerotors
• Will not retrofit
2008 MODEL YEAR TECHNICAL FORUM BUELL
®
NEW Cam Design
• New "K" style cam shafts have
hollow shafts to provide pressurized oil
to the cam bores
• Cam shafts 3 and 4 have an extended
shaft with flats that are used to
drive the oil pump gerotors
• “K" cams and the current "E" cams
have the same specifications
To Next Page
Loading...