2008 MODEL YEAR TECHNICAL FORUM BUELL
®
NEW Harness Update
• New DDFI-3 harness routing reduces
amount of wire under sprocket cover
• New VSS plugs directly into main
harness, common with Sportster models
• Cam position sensor and wiring
have been eliminated and replaced
with a crank position sensor
• Stator and regulator connectors and
wiring have been relocated behind
the new ram air scoop
2008 MODEL YEAR TECHNICAL FORUM BUELL
®
NEW Ulysses
®
Model Updates
• Ulysses
®
fork tubes have increased from
43mm to 47mm
• Forks are offset 5/8 inch forward with
new triple clamps to increase stop to
stop steering angle from 54 degrees
to 74 degrees
• Front axle is offset 5/8th inch rearward
in the new fork lower to maintain the
original 54.1 inch wheelbase
To Next Page
Loading...