SERVICE AND TOOLS2008 MODEL YEAR TECHNICAL FORUM
NEW VRSC™ O² Sensor Tip
• Use HD-48262 O² sensor socket on
front O² sensor
• Rear O² sensor is best serviced
with an open end wrench
SERVICE AND TOOLS2008 MODEL YEAR TECHNICAL FORUM
NEW Buell
®
Oil Pressure Specifications
• Oil pressure should be 10-16 PSI at idle
and normal operating temperature
(was 7-12 PSI at idle)
• Oil pressure should be 20-28 PSI at 3000
RPM and normal operating temperature
(was 10-17 PSI at 2500RPM)
• Torque value for the oil pressure switch
for 2008 XB models has increased to
96-120 in-lbs (10.8-13.6 Nm)
• 2007 and earlier XB models torque value
is 50-70 in-lbs, 5.6-7.9 Nm)
To Next Page
Loading...