NOTE
Refers to important information, and is placed in italic type. It
is recommended that you take special notice of these items.
Proper service and repair is important for the safe, reliable
operation of all mechanical products.The service procedures
recommended and described in this service manual are
effective methods for performing service operations.
Always wear proper eye protection when using hammers,
arbor or hydraulic presses, gear pullers, spring com-
pressors, slide hammers and similar tools. Flying parts
could result in death or serious injury. (00496b)
Some of these service operations require the use of tools
specially designed for the purpose.These special tools should
be used when and as recommended. It is important to note
that some warnings against the use of specific service methods,
which could damage the motorcycle or render it unsafe, are
stated in this service manual. However, please remember that
these warnings are not all-inclusive. Inadequate safety precau-
tions could result in death or serious injury.
Since Harley-Davidson could not possibly know, evaluate or
advise the service trade of all possible ways in which service
might be performed, or of the possible hazardous con-
sequences of each method, we have not undertaken any such
broad evaluation. Accordingly, anyone who uses a service
procedure or tool which is not recommended by Harley-Dav-
idson must first thoroughly satisfy himself that neither his nor
the operator's safety will be jeopardized as a result. Failure to
do so could result in death or serious injury.
PRODUCT REFERENCES
Read and follow warnings and directions on all products.
Failure to follow warnings and directions can result in
death or serious injury. (00470b)
When reference is made in this manual to a specific brand
name product, tool or instrument, an equivalent product, tool
or instrument may be substituted.
Kent-Moore Products
All tools mentioned in this manual with an "HD", "J" or "B"
preface must be ordered through SPX Kent-Moore. For ordering
information or product returns, warranty or otherwise, visit
www.spx.com.
Loctite Sealing and Threadlocking Products
Some procedures in this manual call for the use of Loctite
products. If you have any questions regarding Loctite product
usage or retailer/wholesaler locations, please contact Loctite
Corp. at www.loctite.com.
PRODUCT REGISTERED MARKS
Allen, Amp Multilock, Bluetooth, Brembo, Delphi, Deutsch,
Dunlop, Dynojet, Fluke, G.E. Versilube, Gunk, Hydroseal,
Hylomar, Kevlar, Lexan, Loctite, Lubriplate, Keps, K&N, Mag-
naflux, Marson Thread-Setter Tool Kit, MAXI fuse, Molex, MPZ,
Mulitilock, Novus, Packard, Pirelli, Permatex, Philips, PJ1,
Pozidriv, Robinair, S100, Sems, Snap-on, Teflon, Threadlocker,
Torca, Torco, TORX, Tufoil, Tyco, Ultratorch, Velcro, X-Acto,
and XM Satellite Radio are among the trademarks of their
respective owners.
H-D MICHIGAN, INC.TRADEMARK
INFORMATION
Harley, Harley-Davidson, H-D, Bar & Shield, Digital Tech,
Digital Technician, Destroyer, Deuce, Dyna, Electra Glide,
Evolution, Fat Boy, Glaze, Gloss, H-D, H-Dnet.com, HD, Harley,
Heritage Softail, Heritage Springer, Low Rider, Night Rod, Night
Train, Profile, Revolution, Road Glide, Road King, Rocker,
Softail, Sportster, Sun Ray, Sunwash, Tech Link, Twin Cam
88, Twin Cam 88B, Twin Cam 96, Twin Cam 96B, Twin Cam
103, Twin Cam 103B, Twin Cam 110, Twin Cam 110B, Tour-
Pak, Screamin' Eagle, Softail, Super Guide, Super Premium,
SYN3, Ultra Glide, V-Rod, VRSC, V-Rod, VRSC, Wide Glide,
and Harley-Davidson Genuine Motor Parts and Genuine Motor
Accessories are among the trademarks of H-D Michigan, Inc.
CONTENTS
All photographs, illustrations and procedures may not neces-
sarily depict the most current model or component, but are
based on the latest production information available at the time
of publication.
Since product improvement is our continual goal, Harley-Dav-
idson reserves the right to change specifications, equipment
or designs at any time without notice and without incurring
obligation.
II FOREWORD
To Next Page
Loading...