Need help?Do you have a question about the Harley-Davidson Dyna Glide and is the answer not in the manual?
Overview of manual structure, general guidelines, and basic motorcycle maintenance information.
Essential safety precautions and warnings to prevent injury or damage during service.
Practical advice and tips for efficient and safe service procedures.
Details on fastener types, torque values, and related specifications for assembly.
Information on recommended lubricants, sealants, and their application.
Systematic approach to diagnosing and resolving common motorcycle issues.
Guidance for addressing urgent problems affecting immediate motorcycle operation.
Covers common causes and checks for engine performance problems like rough running.
Diagnostic steps for common electrical system problems.
Procedures for ensuring the motorcycle is safe to operate before each ride.
Recommended service intervals for various maintenance tasks.
Guidance on inspecting, maintaining, and servicing tires and wheels.
Detailed steps for performing engine tune-ups to optimize performance.
Important precautions to follow before beginning engine disassembly or service.
Procedures for servicing rocker arm and cylinder head assemblies.
Instructions for servicing pistons and piston rings.
Guidelines for the proper break-in procedure of the engine after repairs.
Steps for removing the outer primary cover for access to internal components.
Guide to disassembling, inspecting, and reassembling the clutch assembly.
Procedures for starter jackshaft removal, installation, and inspection.
Instructions for replacing the clutch cable for proper operation.
Procedures for adjusting the shifter mechanism for smooth gear engagement.
Steps for removing the transmission top cover to access internal components.
Inspection and service procedures for shift forks.
Instructions for removal, inspection, and installation of the transmission oil tank.
Instructions for carburetor removal, disassembly, inspection, and installation.
Procedures for adjusting throttle and idle cables for optimal engine response.
Guidance on inspecting, removing, and installing the fuel tank and its components.
Procedures for inspecting and servicing the exhaust system.
Covers battery testing, removal, installation, cleaning, and charging.
Diagnostic steps for the charging system to ensure battery maintenance.
Procedures for testing ignition system components.
Instructions for starter motor removal, inspection, and installation.
Procedures for servicing the front wheel, including bearing inspection and replacement.
Instructions for removing, inspecting, and installing the rear wheel.
Checking and correcting wheel balance and runout for optimal handling.
Tire inspection, removal, installation, and repair procedures.
Instructions for removing, installing, and adjusting the handlebar assembly.
Procedures for overhauling and servicing the front fork assemblies.
Servicing the steering head and stem, including bearings and play adjustment.
Procedures for servicing shock absorbers, including preload adjustment and disassembly.
Inspection of swing arm bearings for wear and damage.
Steps for removing and installing the swing arm assembly.
Servicing the front brake system, including pads, caliper, and hose replacement.
Instructions for servicing the rear brake system.
Procedures for handling and bleeding brake fluid.
Maintenance procedures for periodic lubrication of specific components.
Covers ignition timing inspection and adjustment.
Service information specific to clutch plates for 1998 models.
Procedures for servicing the motorcycle battery.
General| Compression Ratio | 9.2:1 |
|---|---|
| Fuel System | Electronic Sequential Port Fuel Injection (ESPFI) |
| Engine | Air-cooled, Twin Cam |
| Displacement | 1584 cc |
| Transmission | 6-speed |
| Front Suspension | Telescopic forks |
| Wheelbase | 1625 mm |
To Next Page