Harley-Davidson Dyna 2008 - SPECIFICATIONS: DRIVE 6.1; SPROCKET SPECIFICATIONS

6.1SPECIFICATIONS: DRIVE
SPECIFICATIONS
Table 6-1. Sprocket Specifications
NO. OF TEETHSPROCKETS
JapanDOM/HDI
3434Compensating
4646Clutch
3232Transmission
6466Rear Wheel
Table 6-2. Clutch Specifications
DESCRIPTIONCLUTCH
Wet-multiple discType
1/16-1/8 in.
(1.6-3.2 mm)
Clutch lever freeplay
(after internal adjustment)
Table 6-3. Gear Specifications
OVERALL GEAR RATIOGEAR
JapanDOM/HDI
9.0309.312First (low)
6.2266.421Second
4.6304.774Third
3.8073.926Fourth
3.1793.279Fifth
2.7062.790Sixth (high)
NOTE
Overall gear ratios indicate number of engine revolutions
required to drive rear wheel one revolution.
2008 Dyna Service: Drive 6-1