1. Wire seal
2. Pin housing
3. Pin terminal
4. Locking wedge
Figure A-22. Deutsch Connector: 2, 3, 4 and 12-Place Pin
Housings
Crimping Terminals
Identify which of the types of Deutsch terminals are used with
the connector and follow the corresponding crimping instruc-
tions. Refer to Table A-2.
Table A-2. Deutsch Connector:Terminal Crimping Instructions
CRIMPING INSTRUCTIONSTYPE
A.7 DEUTSCH STANDARD TERMINAL REPAIRStandard (with crimp tails)
A.8 DEUTSCH SOLID BARREL MINI TERMINAL REPAIRMini Terminal (solid barrel)
A.9 DEUTSCH MINI TERMINAL REPAIRMini Terminal (with crimp tails)
2008 Dyna Service: Appendix A Connector Repair A-15
To Next Page