Need help?Do you have a question about the Harman Kardon ANR 142 and is the answer not in the manual?
General| HDMI outputs | 1 |
|---|---|
| Input Sensitivity | 200mV |
| Type | Receiver |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 47k ohms |
Essential guidelines for safe operation and handling of the audio/video receiver.
Guidance on selecting a safe and suitable location for the unit to ensure proper operation and prevent hazards.
Instructions on how to properly clean the unit and precautions to avoid damage.
Advice on how to unpack the unit safely and prepare it for moving.
Identifies all buttons on the remote control and provides a general overview of their functions.
Details on power, input selection, volume, and navigation buttons on the remote.
Explains buttons for playback, surround modes, and tuner operation.
Details on sleep timer, title selection, and the complete function list mapping.
Explains the function of each control and indicator on the AVR's front panel.
Identifies and describes all rear panel input and output connectors for audio and video signals.
Instructions for connecting various audio sources and speakers to the AVR.
Guidance on connecting video sources, displays, and recording devices.
Details on setting up HDMI connections and considerations for video signal compatibility.
Steps for first turn-on, battery installation, and basic system configuration.
How to set up inputs, associate digital sources, and configure speaker types and sizes.
Steps for selecting and configuring surround sound modes and stereo playback options.
Adjusting audio delay times for speaker synchronization and enabling Night Mode.
Guide to calibrating speaker output levels for optimal audio balance.
How to turn the AVR on/off and select audio/video input sources.
Using headphones for private listening and adjusting volume levels.
Guide to choosing from various surround sound listening modes.
Explanation of Dolby Digital, DTS, and PCM audio playback capabilities.
Connecting and identifying digital audio sources and their playback status.
Understanding display indications for different channel configurations in surround modes.
Using Night Mode for Dolby Digital and performing tape recording.
Fine-tuning output levels and connecting 6-channel direct inputs.
Adjusting the brightness of the front panel information display.
Preserving settings and operating the AM/FM tuner, including presets.
Utilizing Radio Data System for information display and tuning FM stations.
Searching for specific radio broadcast types (PTY) using RDS data.
Solutions for common problems like no power, no sound, or remote unresponsiveness.
Steps to reset the AVR's memory and clear system configuration data.
Detailed technical data for the receiver's audio performance and modes.
Technical details for FM/AM tuner performance and video signal handling.
Information on power requirements, dimensions, weight, and general features.
To Next Page