Harman Kardon AVR 142

To Next Page

Home Solutions

The AVR 142 is all about getting connected – digitally. It features three HDMI

™

inputs,

two wide-bandwidth HDTV-ready component video inputs, a front-panel input for

video games, an auxiliary input for portable media players, and a portfolio of advanced

surround-processing technologies, including Dolby

Digital, DTS

and Logic 7

processing.

With the AVR 142, your speakers never heard it so good!

Key Speciﬁ cations

• Audio Section – Continuous Average Power (FTC), (stereo mode): 40 watts per channel

into 8 ohms @ 20Hz – 20kHz, <0.07% THD, both channels driven; (ﬁ ve-channel

surround mode): 70 watts per channel into 6 ohms @ 1kHz, <0.07% THD, one channel

driven; 35 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, all channels

driven; High Instantaneous Current capability (HCC): ±25 amps

• Tuner – Usable Sensitivity: IHF 1.3µV/13.2dBf; THD at 1kHz with 100% modulation,

(mono): 0.2%; (stereo): 0.3%; FM Adjacent Channel Selectivity: ±400kHz, 70dB;

Ultimate (maximum) S/N Ratio (measured at 1mV RF input level), (mono): 70dB;

(stereo): 68dB

• Dimensions (H x W x D) and weight: 165mm x 440mm x 382mm, 10.9kg

Depth measurement includes knobs, buttons and terminal connections, unless stated otherwise;

height measurement includes feet and chassis, unless stated otherwise.

/ AVR 142

5.1-Channel A/V receiver with HDMI

™

switching

Highlights

• Dolby

Pro Logic

II processing

• Logic 7

(5.1) processing

• DTS

5.1 processing

• HDMI

™

switching

• HDTV-ready

• Component video inputs

• Triple-crossover bass manager

• High-current capability

• 192kHz/24-Bit DAC

Need help?

Do you have a question about the Harman Kardon AVR 142 and is the answer not in the manual?

Harman Kardon AVR 142 Specifications

General

Number of Channels	5.1
HDMI Inputs	2
HDMI Outputs	1
Dolby Digital	Yes
DTS	Yes
FM/AM Tuner	Yes
Frequency Response	10Hz - 100kHz
Input Sensitivity	200 mV
Input Impedance	47 kOhms
Dimensions	440 x 165 x 382 mm
Total Harmonic Distortion	0.07%
FM Tuning Range	87.5 - 108.0 MHz
MW Tuning Range	522 - 1620 kHz
Video Inputs	3 composite
Audio Inputs	4 analog
Audio Outputs	2
Speaker Connectors	Binding posts
Power Output	40 Watts per channel
Tuning Range	FM