Need help?Do you have a question about the Harman Kardon AVR 147 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Type | AV Receiver |
| Output Impedance / Channel | 8 ohms |
| Total Harmonic Distortion | 0.07% |
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | 47 kOhms |
| Input Sensitivity | 200 mV |
| Built-in Decoders | Dolby Digital, DTS |
| Tuner | AM/FM |
| HDMI Pass-Through | No |
| Power Output (per channel) | 40 W |
| Surround Sound Effects | Dolby Digital, DTS |
| DSP Modes | Hall, Theater |
| Input Connections | 2x digital optical |
| Output Connections | composite video monitor out |
| Supported Audio Formats | Dolby Digital, DTS |
Covers usage, cleaning, environmental hazards, and general warnings.
Addresses shock hazards, power cord handling, grounding, and lightning protection.
Details ventilation, unit movement, mounting, and heat considerations.
Outlines conditions requiring professional service and safety checks.
Details analog/digital audio and composite/component video connections.
Explains how to connect speakers and the subwoofer output.
Steps for connecting speakers, subwoofer, and antennas.
Guidance on connecting various audio/video sources.
Instructions for setting up and programming the remote.
Steps for turning on the AVR 147 for the first time.
Guide to the automated speaker setup process.
Step-by-step manual configuration for speakers and levels.
Assigning audio/video inputs to specific sources.
Detailed steps for manual system adjustments.
Table listing symptoms and solutions for common problems.
To Next Page
