Need help?Do you have a question about the Harman Kardon AVR 145 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Total Harmonic Distortion | 0.07% |
| Frequency Response | 10Hz - 100kHz |
| Component Video Inputs | 2 |
| Component Video Output | 1 |
| Composite Video Output | 1 |
| Subwoofer Output | 1 |
| Input impedance | 47k ohms |
| Input sensitivity | 200mV |
| Analog audio inputs | 5 |
| Analog audio outputs | 2 |
| Tuner Type | AM/FM |
| Video Inputs | Composite, Component |
| Surround mode power | 40 Watts per channel |
| Dimensions (W x H x D) | 440mm x 165mm x 382mm |
| Power Output (per channel) | 40 Watts @ 8 Ohms |
| Digital Audio Inputs | 2 (1 Coaxial, 1 Optical) |
Numbered list of safety instructions for operating the unit.
Recommendations for placing the unit to ensure proper operation and avoid hazards.
FCC compliance, important notes, and unpacking instructions.
Description of the AVR 145, its audio section, and supported surround modes.
Lists audio connections, ease-of-use features, and supplied accessories.
Description of power switches, indicators, volume knob, and display.
Controls for source selection, radio tuning, and menu navigation.
Buttons for Tone, Speaker Setup, Channel Level, Digital Input, and Delay.
Details for connecting antennas and speaker outputs to the receiver.
Information on various audio/video input/output and digital audio jacks.
Connections for The Bridge, RS-232, and AC power outlet.
Buttons for selecting devices and key remote parts like the IR lens.
Explanation of buttons for Power, Mute, Volume, Sleep, and EzSet.
Buttons for Speaker Setup, Navigation, Macros, and Surround Mode selection.
Overview of a typical home theater system and its components.
Explanation of multichannel audio and surround sound principles.
How to connect speakers and subwoofers, including polarity.
Guidance on connecting various audio/video source components to the receiver.
Details on analog, digital, composite, S-video, and component video cables.
Recommendations for optimal placement of front, center, surround speakers.
Connecting speakers, subwoofer, antennas, and source components.
Connecting the video display, AC power, and inserting remote batteries.
Guide to programming the remote to control various source devices.
Steps for turning on the AVR 145 for the first time.
How to use the full-screen OSD menu system for setup.
Setting speaker size, crossover, and delay for optimal audio.
Using the EzSet system to automatically calibrate speaker levels.
Configuring source titles, audio inputs, and auto-poll settings.
Procedures for powering the receiver on/off and using the sleep timer.
Adjusting audio levels, muting, and tone settings.
Switching between sources and managing audio/video inputs.
Methods for choosing different surround sound modes.
Explanation of analog and digital audio signal processing.
Specific settings for Dolby and DTS surround modes, including Night Mode.
Manual adjustment of individual speaker channel output levels.
Adjusting display, volume defaults, OSD, and remote programming.
Troubleshooting for power, sound, and picture problems.
Solutions for remote command failures and tuner interference.
Power output, frequency response, distortion, and tuner ranges.
Video specs, power, dimensions, weight, and trademarks.
Tables for default source input, speaker, and delay settings.
Reference tables for remote codes and system configuration defaults.
Comprehensive list of button functions for different devices.
To Next Page
