Need help?Do you have a question about the Harman Kardon AVR 1600 and is the answer not in the manual?
General| Brand | Harman Kardon |
|---|---|
| Model | AVR 1600 |
| Category | Receiver |
| Language | English |
Essential safety guidelines for operating the audio/video receiver, covering general precautions and warnings.
Ensures the unit is connected to the correct AC voltage to prevent hazards and damage.
Guidance on selecting an appropriate and safe location for the AVR unit.
Describes buttons for controlling power, muting audio, and adjusting volume.
Details how to connect a subwoofer and loudspeakers to the receiver.
Recommendations for positioning the front left, right, and center speakers.
Step-by-step guide to connecting speakers to the AVR.
Advice on designing your system and matching devices to sources.
Steps for assigning sources to available video inputs.
Guidance on assigning video and audio inputs for various source devices.
Steps for assigning sources to available digital and analog audio inputs.
Connect audio and video components to the AVR's designated inputs.
Instructions for the initial power-on sequence of the AVR 1600.
Connect the video monitor output from the AVR to the TV.
Connect speakers to the AVR's terminals, ensuring correct polarity.
Connect the AVR and components to AC power outlets.
Configure the remote to control external source devices.
Guide to navigating and using the AVR's on-screen display menus.
Assigning correct audio and video input connections to each source.
Details the automated speaker calibration process for optimal sound.
Adjusting audio parameters like BXR, Tone, Bass, Treble, and channel inputs.
Procedures for powering the receiver on and off.
Adjusting the audio volume using the front panel or remote control.
Guide to choosing and adjusting surround sound modes for different content.
Explains how sources are processed and the variety of surround modes available.
Guide to manually configuring speaker settings when EzSet/EQ is not used.
Adjusting crossover frequencies and subwoofer settings for optimal speaker response.
Steps to determine and set the crossover frequency for each speaker.
Selecting the appropriate subwoofer mode based on speaker setup.
Procedure for measuring speaker distances for delay compensation.
Entering speaker distances to adjust timing and delay settings.
Setting the number of present speakers (ON/OFF) for system configuration.
Procedure for manually adjusting speaker channel output levels.
Manually adjusting output levels for each speaker channel.
General advice on connecting various source devices to the AVR.
Guide to programming the remote to control various source devices.
Using the EzSet/EQ microphone for automatic speaker setup.
Assigning audio and video inputs to sources using the OSD menus.
Details who is protected by the warranty and what defects are covered.
To Next Page
