Need help?Do you have a question about the Harman Kardon AVR 165 and is the answer not in the manual?
General| Receiver type | - |
|---|---|
| Frequency range | 20 - 20000 Hz |
| RMS rated power | - W |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.07 % |
| Power output per channel (20-20KHz@8 Ohm) | 95 W |
| Display | LCD |
| Product color | Black |
| Audio decoders | Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD |
| Handheld remote control | No |
| Apple docking compatibility | Not supported |
| HDMI in | 4 |
| Component video (YPbPr/YCbCr) in | 1 |
| Connectivity technology | Wired |
| AM band range | 520 - 1620 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| 3D | Yes |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 280 W |
Weight and Dimensions| Depth | 385 mm |
|---|---|
| Width | 440 mm |
| Height | 165 mm |
| Weight | 9100 g |
Provides an overview of the Harman Kardon AVR and its features.
Lists all the accessory items included with the AVR.
Details crucial safety precautions and warnings for using the AVR.
Provides instructions on where to place the AVR for optimal performance and ventilation.
Describes the function of each button on the AVR's front panel.
Details the headphone jack, USB port, auxiliary input, and indicator lights.
Explains connections for HDMI, Composite, and Component video outputs/inputs.
Details digital/analog audio ports, speaker terminals, subwoofer, power, and trigger outputs.
Covers connections for radio antennas, IR equipment, and The Bridge IIIP.
Covers power, volume, mute, source selection, and AVR control buttons.
Details buttons for tuning, speaker setup, tone control, and surround mode selection.
Explains OSD, navigation, data entry, macros, and display controls.
Explains basic concepts of multichannel surround-sound systems.
Provides guidance on positioning front, center, surround, and subwoofer speakers.
Details how to connect speakers using various methods and the subwoofer.
Introduces connecting various source devices, including HDMI audio.
Explains optical and coaxial digital audio connections.
Details analog audio, component video, and composite video connections.
Covers connecting antennas and the function of the USB port.
Provides visual guides for connecting speakers and the subwoofer.
Guides on connecting displays via HDMI or Composite Video.
Details on connecting various audio/video source components.
Explains high-quality connections using HDMI and Component Video.
Covers composite video and digital audio (optical/coaxial) connections.
Details standard analog audio connections for source devices.
Guides for connecting analog audio and video recorders.
Instructions for connecting radio antennas and IR remote equipment.
How to connect the optional iPod/iPhone docking station.
Details connecting the 12V trigger output and the AC power cord.
Instructions for installing batteries and programming the remote control.
Steps to turn on the AVR for the first time.
Guides the automatic speaker setup process using the microphone.
Explains how to navigate and use the AVR's on-screen menu system.
How to map digital audio inputs to specific source devices.
Details on Title, Auto Poll, BXR, Tone, Bass, and Treble settings.
Covers volume control, muting, and listening through headphones.
How to select sources and operate the FM/AM tuner and presets.
Provides tips for resolving issues with video signals and HDMI connections.
Explains listening and navigating iPod/iPhone devices via The Bridge IIIP.
Guides on choosing and adjusting surround sound modes.
Explains how analog and digital audio signals are processed.
Describes various surround modes like Dolby, DTS, and Logic 7.
Adjustments for Center Width, Dimension, and Panorama in music mode.
Steps for manually configuring speakers, including crossovers.
Guides on measuring speaker distances from the listening position.
Setting speaker presence, crossover frequencies, and subwoofer modes.
Inputting measured distances and adjusting channel levels.
Detailed steps for manually setting individual speaker output levels.
Configuration for display timeouts, volume defaults, HDMI, and OSD settings.
Programming punch-through and macro commands for the remote.
Guides on making recordings and using the sleep timer.
Procedures for resetting the remote, processor, and memory.
Troubleshooting steps for power, connection, mute, and protection mode issues.
Resolving problems with speaker sound, remote control, and tuner interference.
Detailed technical specs for audio power, sensitivity, and video performance.
Technical data for the FM and AM tuner sections.
Information on power requirements, consumption, dimensions, and weight.
Table mapping source devices to recommended AVR connection types.
Default settings for various sources, including audio input and surround mode.
Default configuration for speakers, crossovers, LFE, and subwoofer mode.
Worksheet for recording speaker distances and A/V sync delay.
Details on video input, digital/analog audio input, and auto poll for each source.
Worksheet for speaker number, crossover, distance, and level adjustments.
List of product codes for programming the remote to control various devices.
Default and user-configurable settings for VFD fade, volume, HDMI, and OSD timeouts.
Details on Dolby Digital, Dolby Digital Plus, Dolby TrueHD, and Dolby Pro Logic II modes.
Explains DTS, Logic 7, 5-Channel Stereo, and 2-Channel Stereo modes.
Table detailing how remote buttons control different source devices.
Continues the table mapping remote buttons to device functions.
List of setup codes for various TV brands to control with the remote.
More TV setup codes for remote control programming.
List of setup codes for various VCR brands to control with the remote.
Additional VCR setup codes for remote control programming.
List of setup codes for various CD players to control with the remote.
More CD player setup codes for remote control programming.
List of setup codes for various DVD players to control with the remote.
List of setup codes for various satellite receivers to control with the remote.
Additional satellite receiver setup codes for remote control programming.
List of setup codes for tape cassette decks to control with the remote.
List of setup codes for cable boxes to control with the remote.
Additional cable box setup codes for remote control programming.
General warnings for all products, including electrical safety and cleaning.
Safety guidelines related to RF energy, FCC regulations, and interference.
Instructions for proper grounding of external antennas to prevent hazards.
Warnings regarding laser beam exposure and product maintenance.
Instructions for safe removal, use, and disposal of batteries.
Details on who is protected by the warranty and how to obtain service.
Explains what is covered, exceptions, and limitations on liability.
Provides contact details and information on legal rights and disclaimers.
To Next Page
