Need help?Do you have a question about the Harman Kardon AVR 161S and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Input Sensitivity/Impedance | 200mV/47k ohms |
| FM Tuner Frequency Range | 87.5MHz – 108.0MHz |
| FM Tuner Signal-to-Noise Ratio (Mono/Stereo) | 70dB/68dB |
| FM Tuner Distortion (Mono/Stereo) | 0.2%/0.3% |
| FM Tuner Stereo Separation | 40dB @ 1kHz |
| AM Tuner Signal-to-Noise Ratio | 38dB |
| AM Tuner Distortion | 1.0% |
| HDMI Inputs | 5 |
| HDMI Outputs | 1 |
| 3D Ready | Yes |
| Audio Return Channel | Yes |
| Dimensions | 121mm x 440mm x 300mm |
| Weight | 4.6 kg |
| Power Requirement | 120V AC, 60Hz |
| Network Connectivity | No |
| Dolby Digital | Yes |
| DTS-HD Master Audio | Yes |
| HDMI Version | 1.4a |
| Frequency Response | 10Hz – 130kHz (+0dB/–3dB) |
| FM Tuner Usable Sensitivity IHF | 13.2dBf |
| AM Tuner Frequency Range | 522kHz – 1, 620kHz |
| Video Resolution | 4K |
| Power Consumption | 410W maximum |
| Power Consumption (Idle) | <0.5W (standby) |
| Bluetooth | Yes |
| Video Inputs | Composite Video |
| Audio Inputs | 2 analog audio |
| Audio Outputs | 1 subwoofer |
| HDMI Features | 3D, ARC, CEC |
| Supported Audio Formats | Dolby Digital, DTS |
Crucial safety precautions for operation, installation, and handling of the AVR.
Guidelines for optimal placement, ventilation, and environmental considerations.
Explains power indicator states, different power modes, and sleep mode functionality.
How to use the remote to control the AVR and compatible source devices.
Diagrams and instructions for placing surround back or front height speakers.
Tips for optimal subwoofer placement to enhance bass performance.
Step-by-step guide for connecting loudspeakers to the AVR's speaker terminals.
How to connect the subwoofer using a single RCA audio cable.
Connecting the AVR to a TV via HDMI for best quality or composite video.
Connecting media players like Roku Streaming Stick and other HDMI devices.
How to program the remote to control various audio/video source devices.
Initial power-on procedure and how to navigate the on-screen menu system.
Steps for the automatic speaker setup process using the EzSet/EQ microphone.
Assigning connections and playback features for each source device.
Connecting the AVR to a home network for internet radio and streaming.
Explains different digital and analog surround modes and their incoming signals.
Setting crossover points for speakers based on their frequency response.
Navigating the manual setup options for speakers, crossover, distance, and output.
Compensating for speaker placement differences and setting output levels.
Guidelines for setting individual speaker levels for optimal listening experience.
Configuring audio output for a second listening zone using assigned amplifiers.
Adjusting panel timeout, auto power off, menu timeout, and status messages.
Procedures for resetting the AVR's processor and setting sleep timers.
Diagnosing and resolving common operational issues with the AVR.
To Next Page