Need help?Do you have a question about the Harman Kardon AVR 130 and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 5.1 |
| Component Video Inputs | 2 |
| Analog Audio Inputs | 6 |
| Total Harmonic Distortion | 0.07% |
| Input Sensitivity | 200mV |
| Tuner Type | AM/FM |
| Frequency Response | 10 Hz - 100 kHz |
| Digital Audio Inputs | 1 Coaxial, 2 Optical |
| Input Impedance | 47 kOhms |
| Dimensions (W x H x D) | 440mm x 165mm x 386mm |
| Video Inputs | 3 Composite |
| Stereo Mode Power | 50W |
Instructions on line voltage, power cords, cabinet handling, grounding, and installation location.
Guidance on unpacking the receiver and proper cleaning methods.
Identification and brief function of each control on the AVR 130 front panel.
Guide to installing the AVR and connecting audio sources and speakers.
Guidelines for optimal speaker placement and selection for surround sound.
Steps to configure speaker sizes, crossovers, and bass management.
Adjusting speaker output levels and delay times for precise sound calibration.
Direct code entry and auto search methods for programming the remote.
Solutions for common issues like no power, no sound, and remote unresponsiveness.
Steps to perform a system reset to clear memory and resolve operational issues.
Visual guide and steps for placing speakers and making initial connections.
To Next Page