Need help?Do you have a question about the Harman Kardon AVR 132 and is the answer not in the manual?
General| Number of Channels | 5.1 |
|---|---|
| Frequency Response | 10Hz - 100kHz |
| Dolby Digital | Yes |
| DTS | Yes |
| Input Sensitivity | 200mV |
| Total Harmonic Distortion | 0.07% |
| Stereo Mode Power | 50 watts per channel (8 ohms, 20Hz - 20kHz, 0.07% THD) |
| Input Impedance | 47 kΩ |
| Audio Decoders | Dolby Digital, DTS |
| Video Inputs | Composite, S-Video |
| Video Outputs | Composite, S-Video |
| Surround Mode Power | 50 watts per channel (8 ohms, 20Hz - 20kHz, 0.07% THD) |
Comprehensive specifications for audio, tuner, video, and general unit features.
Procedure to check for electrical leakage current to ensure safety.
Explanations of all buttons, indicators, and jacks on the front panel.
Detailed explanation of all input and output connectors on the rear panel.
A guide to different surround sound modes and their features.
Step-by-step instructions for removing the top cabinet cover.
Step-by-step instructions for removing the front panel assembly.
Step-by-step instructions for removing the rear panel.
Step-by-step instructions for removing the main printed circuit board.
Steps to reset the unit's memory to resolve operational issues.
Instructions for adjusting the amplifier bias current and voltage.
A high-level overview of the AVR's internal functional blocks.
Diagram illustrating the electrical connections between internal components.
To Next Page
