To Next PageTo Next Page
Need help?Do you have a question about the Harman Kardon AVR 70 and is the answer not in the manual?
General| Impedance | 75 Ω |
|---|---|
| Frequency range | 10 - 100000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 95 dB |
| Total Harmonic Distortion (THD) | 0.1 % |
| Power output per channel (20-20KHz@8 Ohm) | 75 W |
| HDMI in | 3 |
| Line-in | Yes |
| Audio (L/R) in | 1 |
| Digital audio optical in | 2 |
| Connectivity technology | Wired |
| Speakers connectivity type | - |
| Ethernet LAN | No |
| AM band range | 520 - 1720 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Product color | Black |
| Audio decoders | Dolby TrueHD, DTS-HD Master Audio |
| Volume control | Digital |
| Apple docking compatibility | Not supported |
| AC input voltage | 220 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 280 W |
| Cables included | AC |
Weight and Dimensions| Depth | 330 mm |
|---|---|
| Width | 440 mm |
| Height | 125 mm |
| Weight | 9100 g |
Detailed explanations of each front panel button and knob functions, including display and input selectors.
Details on connecting audio sources, recorders, speakers, and system components like antennas and remote IR.
Explains primary functions, operations like source selection, volume, and basic controls.
Critical warnings for safe operation, voltage, handling, and electrical hazards.
Steps for configuring speaker levels, modes, and system settings via menus.
Guide to resolving common operational issues with symptoms, causes, and solutions.
