Do you have a question about the Harman Kardon AVR 7300 and is the answer not in the manual?
Type | AV Receiver |
---|---|
Channels | 7.1 |
THD | 0.07 % |
Input Impedance | 47 kOhms |
Input Sensitivity | 200 mV |
Signal to Noise Ratio | 100 dB |
Component Video Inputs | 3 |
Component Video Outputs | 1 |
Digital Coaxial Inputs | 3 |
Surround Sound | Dolby Digital |
HDMI Inputs | 0 |
HDMI Outputs | 0 |
Width | 17.3 inches |
Details specifications for stereo and multi-channel audio modes, including power output, input sensitivity, and frequency response.
Provides specifications for the FM tuner, covering frequency range, sensitivity, signal-to-noise ratio, and distortion levels.
Lists specifications for the AM tuner, including frequency range, signal-to-noise ratio, sensitivity, and distortion.
Details video specifications such as format, input/output levels, and frequency response for composite, S-Video, and component signals.
Covers general specifications like power requirements, consumption, dimensions, and weight of the receiver.
Lists major external and internal parts of the AVR7300, including chassis, panels, buttons, and heat sinks.
Details various input/output connectors like speaker jacks, RCA jacks, S-Video, and headphone jacks.
Lists electronic components such as capacitors, resistors, diodes, and transistors used in the device.
Procedure for adjusting the DC offset for each channel to ensure proper audio signal output.
Procedure for setting the idle current for each channel amplifier to ensure optimal performance.
Diagram illustrating the flow of audio signals from input sources through processing to output.
Diagram showing the video signal processing stages, including input selection and output.
Overview of control signals, remote control interface, and power supply distribution.
Illustrates how the various circuit boards (Main, Processor, Tuner, etc.) are interconnected via connectors and cables.
Detailed circuit diagrams for the video input/output and processing sections.
Circuit diagrams for the power supply unit, including voltage regulation and filtering.
Circuit diagrams detailing the main processor and DSP functionalities.
Circuit diagrams for the 3-channel and 4-channel amplifier boards.