Need help?Do you have a question about the Harman Kardon AVR 7500 and is the answer not in the manual?
Audio Specifications| continuous average power (stereo mode) | 110 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, both channels driven |
|---|---|
| continuous average power (five-channel surround mode) | 100 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, all channels driven |
| high instantaneous current capability (HCC) | ±75 amps |
Tuner Specifications| usable sensitivity | IHF 1.3µV/13.2dBf |
|---|---|
| THD at 1kHz with 100% modulation (mono) | 0.2% |
| THD at 1kHz with 100% modulation (stereo) | 0.3% |
Weight and Dimensions| dimensions (H x W x D) | 193mm x 440mm x 519mm |
|---|---|
| weight | 22.3kg |
Details power output, input sensitivity, and signal-to-noise ratio for audio.
Covers frequency range, sensitivity, and distortion for FM tuning.
Outlines frequency range and sensitivity for AM tuning.
Lists video format, input/output levels, and frequency response.
Includes power requirements, dimensions, and weight of the receiver.
Explains how to perform a system reset to clear memory and settings.
To Next Page
