Harman Kardon AVR 7300 Quick Start Guide

Thank you for purchasing a Harman Kardon AVR 7300. This Quick-Start Guide will help you with a basic system installation. For detailed information on any step, please refer to the Owner’s Manual pages referenced in this guide. We strongly recommend that you read the Owner’s Manual for complete details on how to install, configure and operate the AVR 7300, as well as for the important safety information it contains.
Figure 1 – Speaker Placement The colors shown for each speaker correspond to the matching output terminal connection on the back of the AVR 7300 (see page 9).
FRONT
LEFT
SPEAKER
(White)
SURROUND
BACK
LEFT
SPEAKER
(Brown)
SURROUND
BACK
RIGHT
SPEAKER
(Tan)
CENTER
SPEAKER
(Green)
SUBWOOFER
(Purple)
SURROUND
LEFT
SPEAKER
(Blue)
FRONT
RIGHT
SPEAKER
(Red)
SURROUND
RIGHT
SPEAKER
(Gray)
Step 1. Place your speakers in the listening room
(see page 21).
SPEAKER PLACEMENT
AVR 7300 QUICK-START GUIDE
Connection Color Guide
Audio Connections Left Right
Front Center Surround Subwoofer Surround Back Digital Audio Connections Coaxial Optical
Video Connections
Composite S-Video
Match the colored jacks on the AVR 7300 to the appropri- ate jacks on your source equipment or speakers. The colors are standardized, but not all equipment or connectors use them.

Harman Kardon AVR 7300 Specifications

General

Brand	Harman Kardon
Model	AVR 7300
Category	Receiver
Language	English