Harman Kardon AVR 210 Product Information

AVR 210
AUDIO/VIDEO RECEIVER WITH
DOLBY* DIGITAL AND DTS
®
No compromises. The Harman Kardon
AVR 210 is about performance.
It’s a 5 x 40-watt A/V receiver with
our signature high-current, ultrawide-
bandwidth amplifier design. But it’s also
about capability. The AVR 210 features
Dolby Digital and DTS decoding, along
with our exclusive Logic 7
®
and VMAx
®
virtual surround sound processing, and
MP3 playback from compatible computer-
based audio sources. And it doesn’t
overlook ease of use, with on-screen
menus and our exclusive EzSet
™
remote,
which automatically sets the system’s
output levels, as well as offering
programmable control of up to six
system components. The Harman Kardon
AVR 210 – performance and capability
without compromise.
Logic7
VMAx
MP3 decoding
EzSet
dolby digital
DTS
front-panel inputs
ultrawide bandwidth
high-current capability
192kHz/24-bit DACs

Harman Kardon AVR 210 Specifications

General

Channels	5.1
Total Harmonic Distortion	0.07%
Input Sensitivity	200mV
Speaker Load Impedance	8 ohms
Digital Inputs	2 Optical, 1 Coaxial
Video Connections	Composite, S-Video
Frequency Response	10Hz to 100kHz
Signal to Noise Ratio	95dB
Dimensions	440 x 165 x 385mm
Power Output	50 watts per channel into 8Ω (stereo)