OPERATION
levels are reset, resume the procedure outlined above
to reset the levels to the desired settings. When all
adjustments are done, press the
⁄
/
¤
Buttons
n
to move the on-screen
›
cursor so that it is next to
BACK TO MASTER MENU and then press
the Set Button p if you wish to go back to the
main menu to make other adjustments. If you have no
other adjustments to make, press the OSD Button
v to exit the menu system.
NOTE: The output levels may be separately trimmed for
each digital and analog surround mode. If you wish to
have different trim levels for a specific mode, select that
mode and then follow the instructions in the steps
shown earlier.
Memory Backup
This product is equipped with a memory backup sys-
tem that preserves the system configuration information
and tuner presets if the unit is accidentally unplugged
or subjected to a power outage. This memory will last
for approximately four weeks, after which time all infor-
mation must be reentered.
OPERATION 31OPERATION 31
AVR 235 OM 8/30/04 9:18 AM Page 31
To Next Page
Loading...
